bestlaptopbattery.co.uk: HP laptop display replaced Guide help you save money

When it comes to dissembling a laptop computer, not mattering if it is the entire system or just a part, you need to take into account that you will need some skills, patience and the process might last a bit. Components are small, there are a lot of tiny screws and you need to carefully disassemble and put back everything together the way it was. When it comes to replacing a HP laptop display, you are facing with a moderate task; you will need a small screwdriver and a flat head screwdriver.

When the display is gone, then you definitely need connect the system to an external monitor and thus you will not be able to walk around with your laptop, so where is the joy then? But luckily, you can replace a HP laptop display and you can do it yourself if you follow some steps. In this way you will learn more about your laptop computer and you will also save some money.

If you are wondering how to replace a HP laptop display, then you are in the right place as here you will find the basic information and steps on how to do it. First of all, you need to turn off your laptop and unplug the AC adapter. This process must be done whenever you need to disassemble your laptop computer. Now just turn the laptop upside down and release the lever for the battery. In order to remove the battery you need to push the release lever. When you removed the battery, place it aside or in a container with all the other parts that will be removed and the screws. Now you need to remove the keyboard cover and in order to do this you will have to take the two hinge cover screws out. Taking out the cover needs some attention, so carefully insert the flat head screwdriver under the cover at the right end and then in the middle and on the left side as well. Now you can lift up the cover and put it aside.

At the rear panel of the laptop you will find two screws that need to be removed. In order to remove them, you should go from left and right antennas and then you will be able to pull them away. Now you have access to the motherboard and you can disconnect the display cable from it. To the top of the case there are also some retaining screws that also need to be removed. These hold the display assembly to the top case and after you have removed them you can carefully lift the assembly off. If you have gone through all the process, you should have a new display to replace the broken one. This needs to be removed from its package and placed into its place on the laptop. Using the cable, connect the display assembly to the motherboard and as final point you need to reassemble the case back and turn the display on in order to see if it works.

These said, you have now the steps in order to replace a HP laptop display. As you can see, you don’t need to disassemble the whole laptop in order to get the job done.

CloudTags: